| |
|
|
|
| |
|
JC Whitney: Products & Inventory |
|
| |
 |
SELF-STORING PULL-OUT STEPS
Check current price & buy online.
|
| | Description: SELF-STORING PULL-OUT STEPS Extend only 8" closed Choose single- or dual-step Steps slide out easily to provide sure footing, slide back and self-store when not needed. All steps are 8" deep and 24" wide. Strong steel construction with durable black powder-coat finish. Perforated so water and dirt drop through. With textured non-skid strip. Easy bolt- or weld-on installation.... click here for more info
|
| |
 |
ELECTRIC RV WATER PUMP & FAUCET
Check current price & buy online.
|
| | Description: ELECTRIC WATER PUMP AND FAUCET Complete set includes pump and faucet (both also sold separately). Single-fixture water pump delivers 1.5 gallons/minute. Quiet, compact—only 4-1/2" high, 1-3/4" diam. Mounts on tank or in water line. Barbed fittings for easy installation. 12 volt; draws 1 amp. Faucet has built-in electrical on/off switch. chrome-plated 4"-long metal spout rotates 360 degrees. Metal base is 3-1/2" x 1-5/8" x 1/2" high. Pump and faucet are matched for most efficient operation. Both use 3/8" hose (not included). Faucet also sold separately.... click here for more info
|
| |
 |
RV GALLEY HAND PUMP
Check current price & buy online.
|
| | Description: GALLEY HAND PUMP FOR RVs Chrome finish on cast metal body. Spout turns 360 degrees. Simple rocker action delivers water quickly. Self-priming. For non-pressurized systems. 3/8" barbed hose connection.... click here for more info
|
| |
 |
ADJUSTABLE BALL MOUNT
Check current price & buy online.
|
| | Description: ADJUSTABLE BALL MOUNT Adjusts for up to 6-1/8" lift to 7-1/2" drop 5,000-lb. gross load rating, 500-lb. tongue weight rating 10" L shank (from pin to ball.). Fits all receivers with 2" I.D. opening. Accepts hitch ball with 3/4" or 1" shank (ball not included). Welded steel. Grade 5 hardware included.... click here for more info
|
| |
 |
STEP BUMPER HITCH
Check current price & buy online.
|
| | Description: CLASS III STEP BUMPER BOX HITCH For deep-drop, reversible ball mounts. 5,000-lb. gross load capacity, 500-lb. tongue weight capacity Allow use of deep-drop ball mounts on vehicles on which body and frame have been raised for off-road ground clearance. Hitch lowers ball mount to normal height for towing. Easily mounted to vehicles where obstructions mean receivers can't be used. Bolt to existing holes (spaced 8"-9") in step bumper with included hardware. Accept 2"-square deep-drop and regular ball mounts (not included). 5,000-lb. Gross load capacity; 500-lb. tongue weight. Note: Do not exceed rated towing capacity of bumper on towing vehicle.... click here for more info
|
| |
 |
DRAWBAR HITCH
Check current price & buy online.
|
| | Description: DRAWBAR HITCH 3,500-lb. GTW, 300-lb. tongue weight. Available in 4" drop or 6" drop For vehicles with step bumpers Mounts to 3/4" or 1" hitch ball hole on step bumper. Drilling one additional 1/2" hole required. Accepts ball with 3/4" shank. An easy and affordable way to lower and extend hitch ball away from bumper. Powder-coated steel. With mounting hardware. Note: Do not exceed rated towing capacity of bumper or towing vehicle.... click here for more info
|
| |
 |
BOX HITCH TOWING KITS
Check current price & buy online.
|
| | Description: BOX HITCH TOWING KITS Choose hitch with high-low ball mount or with straight ball mount Made of heavy-duty steel plate with 4 pre-drilled holes for easy, secure bolt-on installation to step bumper of pick-ups. No welding required. 6"-long ball mount is made of 2" square steel tubing, accepts any 3/4" or 1" shank ball (ball not included). 5,000-lb. gross load capacity; 500-lb. tongue-weight capacity. Note: Do not exceed rated towing capacity of vehicle or bumper. Kit includes hitch, ball mount, hitch pin, bushing and spring clip. Box hitch with high-low ball mount provides 2-3/4" lift or 3-1/2" drop. Box hitch with straight ball mount reverses to 1-1/2" drop.... click here for more info
|
| |
 |
STEP BUMPER BOX HITCH
Check current price & buy online.
|
| | Description: STEP BUMPER BOX HITCH Built-in safety chain holes for fast, easy hook-up! 5,000-lb. gross load capacity, 500-lb. tongue weight capacity Heavy-duty steel plate. Mounting holes allow easy bolt-on installation to existing holes (spaced 8"-9" apart) in step bumper. Hardware included. Accepts regular or deep drop 2" square ball mount (not included). Rust-resistant, black powder-coated finish.... click here for more info
|
| |
 |
ADJUSTABLE BUMPER-MOUNT TOW BAR
Check current price & buy online.
|
| | Description: ADJUSTABLE BUMPER-MOUNT TOW BAR Arms adjust to 42" wide U-joints at ends of arms ensure smooth towing, even over rough roads Bolts directly to bumper of towed vehicle—needs no base plate. Perfect for towing vehicles with flat or other type of bumper. 5,000-lb. towing capacity. Heavy-duty coupler fits 2" hitch ball (sold separately). Quick-disconnect brackets allow easy installation and removal. Folds for convenient, compact storage. Hardware included.... click here for more info
|
| |
 |
SAFETY CHAINS
Check current price & buy online.
|
| | Description: SAFETY CHAINS Double Safety Chains available in several sizes... click here for more info
|
| |
 |
TRAILER LIGHT CONVERTER KIT
Check current price & buy online.
|
| | Description: "CC" AND "DD" TRAILER LIGHT CONVERTER KITS Provide trailer with 3 tail-light functions—running, stop and turn signal Mount inside vehicle For Class I, II, III and IV hitches... click here for more info
|
| |
 |
"BB" Trailer Light Connector Adapters
Check current price & buy online.
|
| | Description: "BB" TRAILER LIGHT CONNECTOR ADAPTERS For cars, pickups, vans and SUVs with Class I, II and III hitches Adapts standard 4-prong flat wiring connector from tow vehicle to 6- or 7-way round trailer light connector from trailer... click here for more info
|
| |
 |
BUMPER-MOUNT BIKE CARRIERS
Check current price & buy online.
|
| | Description: BUMPER-MOUNT BIKE CARRIERS Choose carrier for vans and RVs or carrier for most vehicles 2-pc. design requires no drilling Bottom supports clamp to bumper. Top section slips into the support posts and removes easily when not needed. Plastic-coated hangers hold bikes without marring or scratching. Tubular steel with black-powder-coat finish. Includes 2 tie-down straps and hardware. Instructions included.... click here for more info
|
| |
 |
CYCLEHIKER SPARE TIRE MOUNT FOLDING BIKE CARRIER
Check current price & buy online.
|
| | Description: CYCLEHIKER™ SPARE-TIRE-MOUNT FOLDING BIKE CARRIER Mounts easily without tools to almost any spare Folds up and stores compactly when not needed Safely holds 2 bikes Bike-mounting bars swivel to the left or right of center to accommodate spare tires that are mounted off-center…ensures bikes are always centered on back of vehicle. Four heavy-duty straps—2 secure carrier to spare and 2 secure bikes to carrier.... click here for more info
|
| |
 |
RECEIVER-MOUNT BIKE CARRIERS
Check current price & buy online.
|
| | Description: RECEIVER-MOUNT BIKE CARRIERS Eliminates the need to lift bikes onto vehicle's roof Carrier extends out to clear spare tire or ladder. Padded handles and vinyl-coated hangers hold bikes without damaging either the car's or bikes' finish. Black-powder-coated tubular steel. Includes 2 stretch cords, hardware (for easy assembly) and instructions. Note: Do not exceed recommended tongue weight capacity of receiver. Cannot be shipped express.... click here for more info
|
| |
 |
Bike Carrier
Check current price & buy online.
|
| | Description: HITCH/BUMPER-MOUNT BIKE CARRIER Securely holds 2 bikes without marring vehicle’s finish Attaches easily to almost any hitch or metal bumper (when used with mounting hardware sold separately) Allows full access to car’s trunk. Steel tubing with black powder-coat finish. Hold-down bar, vinyl-coated hangers & stretch cords keep bikes in place. Instructions. Hardware not included—sold separately. Mounting hardware options (sold separately) Receiver hitches with 2", 1-5/8" or 1-1/4" opening, ball (slips over 2" receiver shank—tow & carry bikes at same time), ball hitch (remove ball then bolt hardware through tongue hole) and RV bumper (bolts to 4"- to 41/2"-square bumper or 7" C-channel motor home bumper).... click here for more info
|
| |
|
Receiver Hitch Mouting Hardware
Check current price & buy online.
|
| | Description: 1-1/4" AND 2" RECEIVER HITCH MOUNTS For bike carrier ZX200617X (sold separately).... click here for more info
|
| |
|
Ball Hitch Mouting Hardware
Check current price & buy online.
|
| | Description: BALL HITCH MOUNT Easy to install—remove ball than bolt hardware through tongue hole For bike carrier ZX200617X (sold separately).... click here for more info
|
| |
|
RV Bumper Mounting Hardware
Check current price & buy online.
|
| | Description: RV BUMPER MOUNT Attaches bike carrier to RV bumper Bolts to 4" to 4-1/2" sqaure bumper or 7" c-channel motor home bumper For bike carrer ZX200617X (sold separately).... click here for more info
|
| |
 |
REAR TIRE CARRIERS
Check current price & buy online.
|
| | Description: REAR TIRE CARRIERS Choice of fold-down or stationary carrier Quick-change carrier keeps your spare tire out of storage area. Rust-resistant black powder-coated steel. Installs easily with hand tools to 4" through 4-1/2" square bumper. Fold-down carriers—with easy-reach release—allow trouble-free access to rear compartment. Stationary carriers are similar, but don't swing down. Note: For RVs without rear storage. Choose size corresponding to your spare.... click here for more info
|
| |
 |
FRONT-MOUNT TIRE CARRIER
Check current price & buy online.
|
| | Description: FRONT-MOUNT TIRE CARRIER Low-profile design keeps tire within easy reach without obstructing driver's view Heavy-duty steel channel with rust-resistant black powder-coated finish For pickups, vans and 4x4s Includes separate license plate holder.... click here for more info
|
| |
 |
ALUMINUM STABILIZER JACKS - 4-PIECE SET, 6000-LB
Check current price & buy online.
|
| | Description: ALUMINUM STABILIZER JACKS Cast-aluminum base holds 6,000 lbs. Levels and stabilizes trailer when parked. Rust-resistant zinc-plated screw lets you adjust jack easily from 11" to 17". Stack for compact storage. Set of 4.... click here for more info
|
| |
We hope you found all the items from Acar that you were looking to buy. Our inventory is updated frequently, so check back again for more great deals on Acar and lots of other stuff! |
