| |
|
|
|
| |
|
InstrumentPro.com: Products & Inventory |
|
| |
page : 1 | 2 | .. showing all products for Ampeg
|
| |
 |
Ampeg BA-210SP Bass Combo with Effects
Check current price & buy online.
|
| | Description: Ampeg builds on its legendary tones with digital signal processing. Sixteen presets of effects from overdrive to funk wah and bass synths give you vintage feel with a whole lot of room to mess around with your sound. Footswitch clicks between four preset picks. 220 watts of unbridled power, a piezo tweeter, and two crankin' ten inch drivers with massive magnets bring all that fat tone into the real world. Sturdy birch cab. 21 x 21 x 16. 76 lbs. Features: 1220 watts 16 presets of effects Footswitch allows switching between presets Two heavy-magnet ten inch drivers Piezo hf driver Birch cab... click here for more info
|
| |
 |
Ampeg BSE410HLF 4x10 Bass Cabinet
Check current price & buy online.
|
| | Description: Extended low range for deep, thick, powerful low end! It's a bass player's dream cab. It gives you the definition and clarity of 4 - 10s and a horn, and the extended low range bottom-ported cabinet adds depth and power. Gets deep and big without getting 'boomy." Handles 400W RMS and 800W program. Impedance: 4 ohms. 25.75" x 22.75" x 17.5". 91 lbs.... click here for more info
|
| |
 |
Ampeg SVT-610HLF 6x10 Bass Cabinet
Check current price & buy online.
|
| | Description: A roomful of fat, rich tone! All the soul-stirring, breath-stopping punch and moan you need to hold down the bottom end. 10" bass drivers with 30 oz. magnets and 2" voice coils and a 10 oz. horn with 1" coil to bring out the funky string snaps. Variable level attenuator and resistive bulb wired in series with the horn to prevent damage. Rear skid rails for better protection and easier loading. 4 ohms impedance, 42Hz usable low frequency.... click here for more info
|
| |
 |
Ampeg BA-115SP 100W Bass Combo with Effects
Check current price & buy online.
|
| | Description: Classic '70s Ampeg tone with digitized funk and flare. Sixteen effects including phase shift, wah, bass synths, and octavider run through a hundred watts of pure power into a 15" window-smashing driver with HF tweeter in a tilt-back cab. Included footswitch lets you switch between four effects. Three-knob tone control.... click here for more info
|
| |
 |
Ampeg SVT810E Bass Enclosure
Check current price & buy online.
|
| | Description: Ampeg SVT810E Bass Enclosure A single cabinet that can handle the biggest heads, play the biggest shows. 8 - 10" speakers produce an incredible wall-of-sound! Fidelity is enhanced by the fact that each pair of speakers is in its own internal cabinet which prevents standing wave interference. 800W RMS handling capability. 1,600W program handling. 4 ohms nominal impedance. 48" x 26" x 16". 165 lbs. Features: 8 - 10" speakers Each pair of speakers is in its own internal cabinet 800W RMS handling capability, 1,600W program, 4 ohms nominal impedance.... click here for more info
|
| |
 |
Ampeg BA115 Bass Amp Series Combo
Check current price & buy online.
|
| | Description: A very affordable and great-sounding 'first" Ampeg. This member of Ampeg's starter series has simple, clean looks and easy controls. The BA115 delivers 100W of power to a single 15" speaker. It provides simple 3-band tone controls, plus a 'style selector" with 5 basic tone options. Other features include master and gain controls, a balanced line out (XLR), headphone jacks, and RCA inputs for connecting a CD or tape player. As a handy stage feature, the cabinet tilts back. Features: 100 watts of power 15" speaker Style selector with 5 basic tone options 3-band tone controls Master and gain controls Balanced XLR line out Headphone jack RCA inputs for connecting a tape or CD player Tilt-back cabinet... click here for more info
|
| |
 |
Ampeg SVT410HLF Enclosure
Check current price & buy online.
|
| | Description: Greater low-end response, perfect for 5-string players! This 4 x 10" cabinet has the same speakers and 1" horn as the SVT410HE with 2" coils and 30 oz. magnets, but the cabinet itself is tuned differently. It's deeper and has a bottom port that results in better low-end response, down to 28Hz! 30"W x 24"H x 19"D. 110 lbs.... click here for more info
|
| |
 |
Ampeg SVT410HE Bass Enclosure
Check current price & buy online.
|
| | Description: Great cabinet for clear, dense, cutting bass tones. Features: 4 x 10" speakers with 2" coils and 30 oz. magnets. To enhance these is an added 1" horn. The cab handles 400W RMS and 800W program. 25" x 24" x 16". 91 lbs.... click here for more info
|
| |
 |
Ampeg SVT15E Enclosure
Check current price & buy online.
|
| | Description: Great used alone, or paired with a two-ten cab. This is an especially compact yet powerful cabinet that delivers a full, round tone. It features both Neutrik Speakon® connectors and standard 1/4". Handles 200W RMS, 400W program. 22" x 24" x 16". 72 lbs.... click here for more info
|
| |
 |
Ampeg SVT210HE Enclosure
Check current price & buy online.
|
| | Description: Bolster your bass sound with this robust cab. Solid Ampeg sonics for that classic, punchy bass sound. Features: 2 x 10" Drivers Horn Variable High Frequency Level High Frequency Protection Bass Reflex Cabinet Design 8 Ohms 400 Watts Program 200 Watts RMS 42 Hz - 18K Hz dynamic range... click here for more info
|
| |
 |
Ampeg B50R Rocket Bass Amp
Check current price & buy online.
|
| | Description: Solid-state for lighter weight and optimum reliability. Solid-state for lighter weight and optimum reliability. 50W of power push a single vintage 12" driver. Blue Diamond covering gives it the classic Ampeg look of the '60s.... click here for more info
|
| |
 |
Ampeg BA112 50W Single 12 Combo
Check current price & buy online.
|
| | Description: If you're thinking about upgrading to an Ampeg, the BA-112 is the perfect place to go. Delivers 50W of power to a single 12" speaker. It offers simple 3-band tone controls, plus a 'style selector" with 5 basic tone options. Other features include master and gain controls, a balanced line out (XLR), headphone jacks, and RCA inputs for connecting a CD or tape player. As a handy stage feature, the cabinet tilts back.... click here for more info
|
| |
 |
Ampeg PB-210H PortaBass Cab
Check current price & buy online.
|
| | Description: Compact portability without compromised punch. Vertical cab houses 2 neodymium magnet woofers for a combination of lighter weight and higher volume output. A horn enhances articulation. The cab is constructed of Italian poplar plywood that offers lighter weight and greater resonance. A removable telescoping handle lets you load and roll to the stage. HF variable L-pad control, 1/4" and Neutrik Speakon connectors. Features: Vertical cab Neodymium magnet woofers make it unusually lightweight HF horn enhances articulation Cab is constructed of Italian poplar plywood that offers lighter weight and greater resonance A removable telescoping handle lets you load and roll to the stage HF variable L-pad control 1/4" and Neutrik Speakon connectors 15"W x 24"H x 15.5"D 32 lbs.... click here for more info
|
| |
 |
Ampeg BSE410H 4x10 Cabinet
Check current price & buy online.
|
| | Description: The BSE410H gives you the definition and clarity you expect from 4 - 10s and a horn. Handles 200W RMS and 400W program. Impedance: 4 ohms. 22.75" x 22.75" x 17.5". 75 lbs.... click here for more info
|
| |
 |
Ampeg B100R Bass Combo
Check current price & buy online.
|
| | Description: Classic sound, vintage looks, and an affordable price! Same warm tone and simple controls that made the Portaflex Ampegs of the '60s so popular, but solid-state for lighter weight and optimum reliability. 100W of power push a single vintage 15" driver. Blue Diamond covering gives it the classic Ampeg look of the '60s.... click here for more info
|
| |
 |
Ampeg J12T Tremolo Amp
Check current price & buy online.
|
| | Description: A compact combo with huge vintage tone. This all-tube sweetheart features 2 EL84s in the power section and 2 - 12AX7s in the pre-amp. It generates 15W of Class A power to drive a single 12" Ampeg Vintage speaker. Features genuine tremolo with intensity and speed controls and reverb. Vintage-style blue diamond covering. Features: 2 EL84s in the power section 2 - 12AX7s in the pre-amp 15W of Class A power 12" Ampeg Vintage speaker Tremolo with intensity and speed controls Reverb 19"W x 16"H x 10"D 30 lbs.... click here for more info
|
| |
 |
Ampeg BA110 Bass Combo
Check current price & buy online.
|
| | Description: SVT-like tone in a single 10" combo! Named after its 1950s counterpart, this new combo embodies all the elements that made Ampeg the leader among bass players. It tilts back for easy hearing, has a five-position Style Control that gives five voices with further adjustment by means of a three-band rotary EQ. Has RCA inputs for playing along with a sequencer or CD player.... click here for more info
|
| |
 |
Ampeg B-15R Diamond Blue Series Amp
Check current price & buy online.
|
| | Description: Updated reissue of the famous Portaflex. It has the same flip top as the original. It has the same blue diamond covering. And it has the same signature sound as one of the tidiest, coolest combos of all time. 100W of power (60W in low-power mode) drives a 15" speaker with a tweeter for added edge. Quick, easy tone shaping is provided by a 5-position mid-switch and 3 tone controls. Updated features include a balanced line out and a pre-amp out/power amp in. Play this amp and relive the glory days of the '60s. 24" x 33" x 16.5". 117 lbs.... click here for more info
|
| |
 |
Ampeg R212R Reverberocket Amp
Check current price & buy online.
|
| | Description: Oozing vintage charm. The world's most sought-after amp by both jazz and blues guitarists. Characterized by its outstanding clean, fat, round tube tone and featuring diamond blue vintage covering, this amp will take you back to tube-tone paradise. 50W of Class AB power, two Ampeg Vintage 12" speakers, two Groove Tube 6L6s and three 12AX7s, two-channel operation, and reverb. Bass, mid, and treble tone controls. Line out/line in connections have been added. 25"W x 19"H x 11"D. 55 lbs. Features: Clean, fat, round tube tone Diamond blue vintage covering 50W of Class AB power Two Ampeg Vintage 12" speakers Two Groove Tube 6L6s and three 12AX7s Two-channel operation Bass, mid, and treble tone controls Reverb Line out/line in connections... click here for more info
|
| |
 |
Ampeg 810AV Anniversary Cabinet
Check current price & buy online.
|
| | Description: Ampeg 810AV Anniversary Cabinet.... click here for more info
|
| |
 |
Ampeg PR810H 8X10 Bass Cabinet with Horn
Check current price & buy online.
|
| | Description: Ampeg PR810H 8X10 Bass Cabinet with Horn Sheer, unadulterated power handling! This monster cab is armed with eight heavy-duty, custom-designed, cast frame, 10" speakers and two HF horns that'll dish up voluminous bass in even the biggest venues. Ruggedly constructed from 13-ply Baltic birch, the cab has an industrial strength grip bar and heavy-duty, recessed wheels. Skid rails protect it while loading in and out. It's 'split" into two isolated 8-ohm 4X10 cabs so that each cab can be driven by separate amps, or they may be connected externally via the jackplates to create a single, 4-ohm 8X10 cab powered with a single amp. Speakon® and 1/4" jacks are wired in parallel for simple daisy chaining. Features: Eight heavy-duty, custom-designed, cast frame, 10" speakers Two HF horns 13-ply B... click here for more info
|
| |
 |
Ampeg PB-110H PortaBass Bass Cab
Check current price & buy online.
|
| | Description: Less weight, incredible power and volume. A new speaker design eliminates traditional heavy magnets and baskets by using lightweight neodymium. The cab is constructed of high-quality Italian poplar plywood that resonates sonically to enhance your bass tone while being amazingly light. A removable telescoping dolly-style handle allows you to load and roll to the stage. 10" speaker plus horn. 50W handling, 125W RMS. HF variable L-pad control, 1/4" and Neutrik Speakon connectors. Features: Neodymium speaker magnets for greatly reduced weight Loaded with a 10" speaker and horn Cab constructed of Italian poplar plywood for combination of resonance and light weight HF variable L-pad control 250W handling, 125W RMS. Removable telescoping dolly-style handle allows you to load and roll to the stag... click here for more info
|
| |
 |
Ampeg SVT-215E Enclosure
Check current price & buy online.
|
| | Description: Let your bass head vent with penetrating punch. One of the world-renowned classic series, this cab provides huge bottom end that stays tight and clear, never muddy. Two fifteen-inch drivers with eighty-ounce magnets set the entire hall into trembling motion. Super sturdy, reinforced cab. 26"W x 48"H x 16"D. 148 lbs. Features: Acoustically innovative Ampeg cab design Two 80 oz., 15" driversSturdy reinforced cab... click here for more info
|
| |
 |
Ampeg SJ-12T Super Jet
Check current price & buy online.
|
| | Description: A vintage dream machine. The Super Jet is a smooth ride with 50 Class AB watts, a single 12" Ampeg Vintage speaker, all-tube design (2 - 6L6s and 2 - 12AX7s), reverb, and tremolo. Tone and tremolo speed and intensity controls. Vintage Ampeg look with blue diamond covering and stovepipe knobs. It produces the outstandingly clean, fat, round tone that jazz and blues players crave. 19"W x 16"H x 10"D. Only 30 lbs. Features: 50 Class AB watts Single 12" Ampeg Vintage speaker All-tube design: 2 - 6L6s and 2 - 12AX7s Reverb Tremolo Tone and tremolo controls (speed and intensity)... click here for more info
|
| |
 |
Ampeg R412TA Slant Enclosure
Check current price & buy online.
|
| | Description: More power onstage! The slant-front R412TA carries 4 - 12" speakers and is the perfect half- or full-stack cab to go under the R50H Diamond Blue Lead. Sure to delight the most discerning vintage-tone aficionado. 120W RMS handling; 200W program handling. Features: Diamond Blue cosmetics Perfect for stacking with the R-50H Gorgeous vintage tone 4 - 12" speakers 120W RMS handling, 200W program handling... click here for more info
|
| |
 |
Ampeg R12R Reverberocket Amp
Check current price & buy online.
|
| | Description: Sate your retro cravings with a crankin' vintage tone machine. Digital schmigital. When you need the real raw power that drove rock 'n' roll to the heights of glory, you need 100% tubes. This Class AB 50W dynamo features two 6L6s and three 12AX7s for all the full, warm, crunchy, or edgy possibilities that can only come from properly driven valves. The 12" heavy-magnet Ampeg Vintage driver follows through on that genuine vintage feel with big volume that's forever true to the signal. Two switchable channels, three-band EQ, spring reverb, and line-level I/O give you full modern-day control and flexibility. 19"W x 24"H x 11"D. 45 lbs. Features: 50W Class AB (2 x 6L6) 12" Ampeg Vintage speaker All tube (3 x 12AX7) Channel switching Volume, gain, and master controls Bass, mid, treble Reverb Li... click here for more info
|
| |
 |
Ampeg PR410HLF Pro Series 4x10 Ext Range Cabinet
Check current price & buy online.
|
| | Description: Unbelievable clarity and distortion-free volume. Designed for the highest fidelity reproduction. High power handling, flat response, and incredible construction in a great-looking enclosure. Features cast frame drivers, high-frequency horns with variable level attenuators and light bulb protection, thirteen-ply 3/4" Baltic birch plywood cabinets, multi-coat urethane polymer finish/sealant, sixteen-gauge steel grilles, edge-armor corner protection, 12dB/octave crossovers, Neutrik Speakons, and 1/4" inputs. Features: Four 10" cast drivers 2.5" voice coil 56 oz. magnets Horn/driver 1" voice coil 10 oz. magnet 600 watts RMS 1200 watts program Frequency response (-3dB): 38-18kHz Nominal impedance: 4 ohms Crossover frequency: 4kHz30" x 26" x 19" 128 lbs.... click here for more info
|
| |
 |
Ampeg SVT810HP Bass Speaker Enclosure
Check current price & buy online.
|
| | Description: An updated classic; the ultimate bass enclosure. 8 - 10" speakers produce an incredible wall-of-sound! As in the original, fidelity is enhanced by the fact that each pair of speakers is in its own internal cabinet which prevents standing wave interference. The speakers used, however, are new: cast-frame speakers with edge-aluminum voice coils for maximum clarity and power. Two of these speakers are TRACTRIX Wave-Guide coaxials that reproduce high frequencies like no other. An L-pad attenuator allows the highs to be adjusted to suite individual needs. 1,500W RMS handling capability. 3,000W program handling. 4 ohms nominal impedance. 26"W x 48"H x 16"D. 205 lbs. Features: 8 - 10" speakers produce an incredible wall of sound Each pair of speakers is in its own internal cabinet which prevents... click here for more info
|
| |
 |
Ampeg SVT810AV
Check current price & buy online.
|
| | Description: The Real Deal! World-renowned SVT 8 x 10" speaker cabinet with classic 60's Anniversary cosmetics...same specs/construction as the SVT810E. Matches the Classic SVTAV 300watt head.... click here for more info
|
| |
 |
Ampeg B2 Combo Bass Amp
Check current price & buy online.
|
| | Description: Ampeg B2 Combo Bass Amp 200 watt 15" combo bass amp. The perfect small club bass combo! Classic Ampeg sound...3 band EQ ultra-mid control plus 9 band graphic equalizer!... click here for more info
|
| |
 |
Ampeg B-2R Rack Head
Check current price & buy online.
|
| | Description: Ampeg B-2R Rack Head Lots of power, lots of features, and a very affordable price! This 2-rack powerhouse delivers everything you need for strong, driving bass, no matter what your style. Think of it as an economy version of the SVT3-Pro. 350W at 4 ohms. 200W at 8 ohms. It features a MOSFET power section and all the tone-shaping tools you need: 3-band tone with ultra mid control and a 9-band graphic. It also provides a balanced line out (pre/post with level selector), an effects loop, input pad, LED peak indicator, and defeatable optocoupler limiter. A variable speed fan keeps it cool.... click here for more info
|
| |
 |
Ampeg SVT-CL Classic Bass Head
Check current price & buy online.
|
| | Description: It's the original all-tube monster bass amp, the classic of classics! Back in the '60s, when players needed a big stage amp, the SVT was the amp of choice. No question. This reissue brings it back in all its glory. It delivers 300W (to either two or four ohms). Its tube array includes two - 12AX7s in the pre-amp, two - 12AU7s and a 12AX7 for drivers, and six - 6550s for power. Controls include three bands of tone, a five-way mid selector, plus ultra-low and high boosts. Other pro features include normal and padded inputs, tube protection circuitry, auto-fault mode, fan cooling, slave output jack, 4/2 ohm selector, user biasing controls, and three-position AC polarity switch. 24"W x 11.5"H x 13"D. 80 lbs. Features: 300W tube power Three-band tone/five-way mid selector/low and high boosts N... click here for more info
|
| |
 |
Ampeg SVT-350H Classic Head
Check current price & buy online.
|
| | Description: Super power and tube feel with solid-state reliability. Authentic vintage Ampeg tube sound with the Classic series look. Sports a 350-watt MOSFET output to provide the most tube-like feel of any amp in its class. Optocoupler limiter circuit maximizes clean acoustic output and crunches a little when defeated. Pre/post EQ XLR line out, line out level select, variable speed fan. Features: Vintage Ampeg tube sound 350-watt MOSFET output Defeatable optocoupler limiter Pre/post EQ XLR line out Line out level select Variable speed fan... click here for more info
|
| |
 |
Ampeg SVT-3 PRO Series Head
Check current price & buy online.
|
| | Description: A totally modern, hybrid version of the famous SVT. Its tube pre-amp section re-creates the great bass tone that made the original SVT the most-respected bass amp of all time. The power section is tube-driven solid state with a toroidal transformer that generates less noise and magnetic interference. Delivers 450W into 4 ohms and has an arsenal of tone-shaping tools: 3 bands of tone, a 5-position mid selector, 9-band graphic EQ, plus low and high boosts. Other pro features include input peak LED, input pad and bright switch, mute function, tuner out, variable line-out level, time-delayed turn on, DC-supplied filaments, and variable fan speed. 2U rackmount. Features: Tube pre-amp section re-creates great bass tone of the original SVT 450W into 4 ohms 3 bands of tone 5-position mid selector... click here for more info
|
| |
 |
Ampeg PB250 PortaBass Head
Check current price & buy online.
|
| | Description: Less size, more power, more tone. The PortaBass Head offers the ultimate combination of full power and lightweight, compact construction. Micro Dynamic power amp circuitry eliminates bulky heat sinks, transformers, and filter capacitors, yet provides 250W and articulate dynamic response. Perfect for use with every kind of bass, from a hot-rodded 5-string to a vintage '60s classic. Features: Offers the ultimate combination of full power and lightweight, compact construction Micro Dynamic power amp circuitry eliminates bulky heat sinks, transformers, and filter capacitors Provides 250W and articulate dynamic response Very clean, high-fidelity tone 12.5"W x 3.75"H x 10.5"D 14 lbs.... click here for more info
|
| |
 |
Ampeg SVP-BSP Billy Sheehan Preamp
Check current price & buy online.
|
| | Description: All the tone-shaping capability of the SVT Pro heads! This tube-driven pre-amp features two channels, each with full equalization that can be switched or combined to create Billy's original dual SVT sound. Each channel has a separate transformer, balanced XLR line outputs, and discrete effects loops. Each also features three tone controls with sweepable mids, and ultra low/high boosts. Other features include input pad, pull gain boost, compressor, noise gate, mute function, and tuner out.... click here for more info
|
| |
 |
Ampeg SVP-Pro Series Pre-amp
Check current price & buy online.
|
| | Description: Multivalve warmth and body with high-tech accouterments. Five 12AX7 valves provide the true, rich, tubular tone only a genuine multivalve signal path can generate. Tube Drive Control gives you precision command over just how hot those babies burn. Input peak LED, input pad and bright switch, mute function (to avoid those annoying clicks when you switch instruments mid-song), balanced line out, effects loop, three EQ knobs, nine-band graphic EQ, and tuner out give you all the pro flexibility you expect from Ampeg. 19"W x 1.75"H x 10"D. 9 lbs. Features: Five 12AX7 tubes Balanced line out Effects loop Nine-band graphic EQ Five-position mid tone control Tube Drive Control Input peak LED Input pad & bright switch Mute function Tuner out... click here for more info
|
| |
 |
Ampeg Blem SVT-5PRO 2 Channel 1,000W RMS Bass Head
Check current price & buy online.
|
| | Description: Big stereo power, fat tone, and peerless reliability. 2 balanced line-level outs, 2 effects loops, MOSFET power stage, tube pre-amp with one 12AX7, and 3-band tone controls make it a truly versatile, heavy-artillery bass head. State-of-the-art professional features include variable 0-4:1 compressor, 1/4" bi-amp high and low outs, -15dB pad, 1/4" input, overdrive channel with boost and 3-band EQ, defeatable Optocoupler limiters, internal 24dB octave crossover, variable crossover point, and octave circuit. 500W x 2 @ 2 ohms, 340 x 2 @ 4 ohms, 255 x 2 @ 8 ohms. Features: Stereo 2 balanced line-level outs 2 effects loops MOSFET power stage Tube pre-amp with one 12AX7 3-band tone controls 0-4:1 compressor 1/4" bi-amp high and low outs -15dB pad 1/4" input Overdrive channel with boost and 3-ban... click here for more info
|
| |
 |
Ampeg SVT-5PRO 2 Channel 1,000W RMS Bass Head
Check current price & buy online.
|
| | Description: Big stereo power, fat tone, and peerless reliability. 2 balanced line-level outs, 2 effects loops, MOSFET power stage, tube pre-amp with one 12AX7, and 3-band tone controls make it a truly versatile, heavy-artillery bass head. State-of-the-art professional features include variable 0-4:1 compressor, 1/4" bi-amp high and low outs, -15dB pad, 1/4" input, overdrive channel with boost and 3-band EQ, defeatable Optocoupler limiters, internal 24dB octave crossover, variable crossover point, and octave circuit. 500W x 2 @ 2 ohms, 340 x 2 @ 4 ohms, 255 x 2 @ 8 ohms. Features: Stereo 2 balanced line-level outs 2 effects loops MOSFET power stage Tube pre-amp with one 12AX7 3-band tone controls 0-4:1 compressor 1/4" bi-amp high and low outs -15dB pad 1/4" input Overdrive channel with boost and 3-ban... click here for more info
|
| |
 |
Ampeg SVT-2 Pro Series Head
Check current price & buy online.
|
| | Description: Deep sound, great looks, and tone from the heart! You know it's right when the sound you hear matches the sound in your imagination. For over five decades, Ampeg has been helping bass players reach that place where it all comes together. The SVT-2 Pro head is a shining example of Ampeg's attention to quality and detail. Five 12AX7 tubes provide you with gobs of tone, texture, and gain, while the six 6550s launch 300 heart-thumping watts into the air. Flexible EQ including three tone controls, a five position midband frequency control, and a 9-band graphic equalizer work together to help you shape the tone you demand from your gear. The 1/4" thick extruded aluminum front panel not only look good, it is essential for safe racking. With the power and flexibility of these amps, your creative m... click here for more info
|
| |
 |
Ampeg SVT-4 PRO Series Bass Head
Check current price & buy online.
|
| | Description: The big gun . . . the industry's highest powered bass amp! This true hybrid features a 3-tube pre-amp, a Mos-Fet power amp that delivers 1200W into 4 ohms, tons of tone-shaping tools, and all the Pro features you'll ever need. For tone control you get 3 tone controls, a 5-position mid switch, a 9-band graphic, and ultra low/high boosts. It also features a defeatable optocoupler limiter, a variable 0-7:1 compressor, an internal 24dB/octave crossover, a 50-1kHz crossover point, high/low balance control, tuner out/mute function, 1/4" bi-amp outputs, 2 balanced line outs with transformers, 2 effects loops, and 2 pre-amp out/power amp ins. It gives you classic SVT tone and more.... click here for more info
|
| |
 |
Ampeg V4BH 100 Watt Tube Bass Head
Check current price & buy online.
|
| | Description: Classic all-tube Ampeg tone. This head is similar to the SVT, just smaller in output (100W). It uses the same tubes in the pre-amp and drive sections (two x 12AX7 in the pre-amp, a 12AU7 and 12AX7 for drive). For the power section it uses four 6L6s. Controls include 3-band EQ, 5-position mid-tone control, ultra low/high boost, and presence switch. Connections include normal and padded input, a balanced line out, and pre-amp out/power amp in. 24" x 11" x13". 40 lbs. Features: 100W power at four and eight ohms All tube pre-amp, drive, and power sections 3-band EQ 5-position mid switch Normal and padded input Tube protection circuitry Ultra low and high boost Slave output jack Tube complement: two x 12AX7 preamp, 12AU7 and 12AX7 driver tubes, four 6L6 power tubes 8/4 ohm impedance section... click here for more info
|
| |
 |
Ampeg B4R Solid State Head
Check current price & buy online.
|
| | Description: It's the poor man's version of the SVT-4 Pro and a very impressive amp in its own right. It's the most powerful amp in its class and loaded with the features you need to make today's music. Here's the long list: dependable solid-state circuitry, MOSFET power section, three bands of tone with Ultra Mids, five-position style selector, 9-band graphic, texture tube emulation circuitry, series/parallel effects with blend control, defeatable optocoupler limiters, push button bi-amp/full range capability, stereo/mono bridge switch, internal 24dB/8va crossover with 100Hz to 1kHz variable point, high/low balance control, mute function, 15 amp circuit breaker, and power to spare.... click here for more info
|
| |
 |
Ampeg SVTAV Amp Head
Check current price & buy online.
|
| | Description: Anniversary version of the soul-shaking SVT Classic...the unmistakable Ampeg sound - 300watts of pure tube power! 6x6550 power tubes multi-tube preamp 5 position midrange control...Rock the World! See the SVT 810AV enclosure for the ultimate match.... click here for more info
|
| |
 |
Ampeg SVPBSB Preamp
Check current price & buy online.
|
| | Description: Take a lesson from Billy Sheehan...the SVP-BSP tube driven preamp features two switchable channels each with full equalization for a dual SVT sound...express yourself with this true tone machine!... click here for more info
|
| |
 |
Ampeg USA T-Shirt
Check current price & buy online.
|
| | Description: Ampeg USA T-Shirt... click here for more info
|
| |
 |
Ampeg AFP2 Footswitch
Check current price & buy online.
|
| | Description: Ampeg AFP2 Footswitch... click here for more info
|
| |
 |
Ampeg AFP3 Triple Footswitch
Check current price & buy online.
|
| | Description: Ampeg AFP3 Triple Footswitch... click here for more info
|
| |
 |
Ampeg AFP1 Single Footswitch
Check current price & buy online.
|
| | Description: Ampeg AFP1 Single Footswitch... click here for more info
|
| |
page : 1 | 2 | .. showing all products for Ampeg
- showing 30 max results per page
|
| |
We hope you found all the items from Ampeg that you were looking to buy. Our inventory is updated frequently, so check back again for more great deals on Ampeg and lots of other stuff! |
