| |
|
|
|
| |
|
InstrumentPro.com: Products & Inventory |
|
| |
 |
Ortofon SM1 Slip Mats
Check current price & buy online.
|
| | Description: Ortofon SM-1 Slipmats (Pair) The first thing you should do when you get your turntables if you are planning on beatmatching or scratching is take off those thick, heavy rubber mats they come with. The next stage is to get yourself some slipmats like the Ortofon SM-1. Good quality slipmats like these reduce the friction and allow the turntable to revolve at its normal speed even when you hold the vinyl still. When you finally release the vinyl, the slipmat should grip the record and take it to the speed of the turntable almost instantly. Good slipmat like these are an absolute necessity and you'll get used to the way they feel when you mix. If you're going on the road, why take chances? Buy an extra pack to put in your record bag just in case. Not only will they provide a light extra paddin... click here for more info
|
| |
 |
Ortofon TS1 T-Shirt
Check current price & buy online.
|
| | Description: T-shirt with the Ortofon logo and the legend, "Needle To The Groove". XX-Large only.... click here for more info
|
| |
 |
Ortofon FLC1 Finger Lift Cover
Check current price & buy online.
|
| | Description: Finger lift cover for Ortofon products.... click here for more info
|
| |
 |
Ortofon SS Stylus Scratch
Check current price & buy online.
|
| | Description: Scratch Replacement Stylus (Neon Red, Spherical) Ultimate Scratch Stylus Precision Tracking Superior Sound Quality Highest Durability... click here for more info
|
| |
 |
Ortofon SE Elektro Stylus
Check current price & buy online.
|
| | Description: Replacement Stylus suitable for the Ortofon Elektro cartridge.(WHITE, Spherical) Specifications: Spherical Cantilever Design 8mv Output Voltage 20-22kHz Frequency Response .1 To .17oz. Optimum Tracking Weight Fits OM or Concorde Recommended Tracking Force: .14 oz.... click here for more info
|
| |
 |
Ortofon SGT Stylus
Check current price & buy online.
|
| | Description: GT Replacement Stylus (BLACK)... click here for more info
|
| |
 |
Ortofon SGE Gold Stylus
Check current price & buy online.
|
| | Description: Ortofon Gold elliptical stylus. Frequency range at - 3dB: 20-22.000 Hz Frequency response: 20-20.000 Hz ± 2 dB FIM distortion at recommended tracking force: DIN 45.542< >1% Tracking ability at 315Hz at recommended tracking force: 80 µm Compliance, dynamic, lateral: 7 µm/mN Stylus type: Special elliptical Stylus tip radius: r/R 13/25 µm Equivalent stylus tip mass: 0,5 mg Tracking force range: 2,0-5,0 g (20-50 mN) Tracking force, recommended: 3,0 g (30 mN) Tracking angle: 20° Stylus colour: Gold... click here for more info
|
| |
 |
Ortofon SNCE Yellow Stylus
Check current price & buy online.
|
| | Description: ORTOFON NIGHTCLUB ELLIPTICAL SPECIFICATIONS: Output voltage at 1000 Hz, 5cm/sec. 6 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 23 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-22.000 Hz Frequency response 20-20.000 Hz ± 2 dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 80 µm Compliance, dynamic, lateral 7 µm/mN Stylus type Special elliptical Stylus tip radius r/R 13/25 µm Equivalent stylus tip mass 0,5 mg Tracking force range 2,0-5,0 g (20-50 mN) Tracking force, recommended 3,0 g (30 mN) Tracking angle 20° Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 p... click here for more info
|
| |
 |
Ortofon SNCS Night Club Stylus
Check current price & buy online.
|
| | Description: ORTOFON NIGHTCLUB SPHERICAL SPECIFICATIONS: Output voltage at 1000 Hz, 5cm/sec: 6 mV Channel balance at 1 kHz: 1.5 dB Channel separation at 1 kHz: 23 dB Channel separation at 15 kHz: 15 dB Frequency range at -3 dB: 20 - 22,000 Hz Frequency response: 20 - 18,000 Hz +3 / -2 dB FIM distortion at recommended tracking force, DIN 45.542: < 1% Tracking ability at 315 Hz at recommended tracking force: 80 m Compliance, dynamix, lateral: 7 m/mN Stylus type: Spherical Stylus tip radius: R 18 m Equivalent stylus tip mass: 0.5 mg Tracking force range: 2.0-5.0 g (20-40 mN) Tracking force, recommended: 3.0 grams (30 mN) Tracking angle: 20 Internal impedance, DC resistance: 750 ohm Internal inductance: 450 mH Recommended load resistance: 47 kOhm Recommended load capacitance: 200-600 pF Cartridge color... click here for more info
|
| |
 |
Ortofon SDJE Blue Elliptical Stylus
Check current price & buy online.
|
| | Description: Technical Data Frequency range at - 3dB: 20-22.000 Hz Frequency response: 20-20.000 Hz ± 2 dB FIM distortion at recommended tracking force, DIN 45.542: < 1% Tracking ability at 315Hz at recommended tracking force: 80 µm Compliance, dynamic, lateral: 9 µm/mN Stylus type: Special elliptical Stylus tip radius: r/R 13/25 µm Equivalent stylus tip mass: 0,6 mg Tracking force range: 2,0-4,0 g (20-40 mN) Tracking force, recommended: 3,0 g (30 mN) Tracking angle: 20° Stylus colour: Blue... click here for more info
|
| |
 |
Ortofon SDJS Blue Spherical Stylus
Check current price & buy online.
|
| | Description: Technical Data Frequency range at - 3dB: 20-20.000 Hz Frequency response: 20-18.000 Hz + 3 / - 2 dB FIM distortion at recommended: tracking force, DIN 45.542: < 1% Tracking ability at 315Hz at recommended tracking force: 80 µm Compliance, dynamic, lateral: 9 µm/mN Stylus tip radius: R 18 µm Equivalent stylus tip mass: 0,6 mg Tracking force range: 2,0-4,0 g (20-40 mN) Tracking force, recommended: 3,0 g (30 mN) Tracking angle: 20° Stylus colour: Blue... click here for more info
|
| |
 |
Ortofon SP Stylus Pro
Check current price & buy online.
|
| | Description: Technical Data Frequency range at - 3dB: 20-20.000 Hz Frequency response: 20-18.000 Hz + 3 / - 2 dB FIM distortion at recommended tracking force, DIN 45.542: < 1% Tracking ability at 315Hz at recommended tracking force: 70 µm Compliance, dynamic, lateral: 7 µm/mN Stylus type: Spherical Stylus tip radius: R 18 µm Equivalent stylus tip mass: 0,5 mg Tracking force range: 3,0-5,0 g (30-50 mN) Tracking force, recommended: 4,0 g (40 mN) Tracking angle: 20° Stylus colour: Silver... click here for more info
|
| |
 |
Ortofon SPS Stylus Pro S
Check current price & buy online.
|
| | Description: Technical Data Frequency range at - 3dB: 20-20.000 Hz Frequency response: 20-18.000 Hz + 3 / - 2 dB FIM distortion at recommended tracking force, DIN 45.542: < 1% Tracking ability at 315Hz at recommended tracking force: 70 µm Compliance, dynamic, lateral: 7 µm/mN Stylus type: Spherical Stylus tip radius: R 26 µm Equivalent stylus tip mass: 0,5 mg Tracking force range: 3,0-5,0 g (30-50 mN) Tracking force, recommended: 4,0 g (40 mN) Tracking angle: 20° Stylus colour: Black... click here for more info
|
| |
 |
Ortofon CCNCEK Cartridge and Stylus Kit
Check current price & buy online.
|
| | Description: Yellow elliptical cartridge with extra stylus.... click here for more info
|
| |
 |
Ortofon CCSK Concorde Scratch Kit
Check current price & buy online.
|
| | Description: Ortofon Scratch Concorde Kit The new cartridge models We found the name "Scratch" to be suitable for a new Ortofon cartridge, doing this kind of job. The stylus unit as well as the cartridge body are made from a fluorescent neon-red material, which makes the complete cartridge highly apparent in spot light and luminous in ultra-violet light. The Scratch cartridge is available in either the Ortofon OM version for mounting in standard head shells, or in the integrated Ortofon Concorde design for direct mounting in the tonearms with standard sockets. Bother versions can also be supplied in a convenient Box Set, with two extra stylus units, for practical protection and transportation. Anti-skating and maintenance Our recommendation when adjusting anti-skating for the Ortofon Scratch cartridge,... click here for more info
|
| |
 |
Ortofon CCEK Elektro Kit
Check current price & buy online.
|
| | Description: Ortofon Concorde Elektro Kit Perfect for all types of dj styles and techniques, especially techno music mixes. Delivers a high output with clean crisp highs and a deep, pounding bass line. The new technical features are based on an improvement of the Ortofon Night Club S, now even more robust - for working with 4 gram recommended tracking force - combined with increased tracking ability and with the output raised to more than 7mV. At the same time Ortofon has succeeded in retaining the well accepted sonic image from the Night Club S. Tracking ability is decisive for the DJ's especially when doing scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not a a... click here for more info
|
| |
 |
Ortofon OMSK Scratch Kit
Check current price & buy online.
|
| | Description: Ortofon OM Scratch Kit Scratch Kit comes with neon red cartridge and an extra stylus. Technical Data: Output voltage at 1000 Hz, 5cm/sec. 7 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 25 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-20.000 Hz Frequency response 20-15.000 Hz + 2 / - 3 dB FIM distortion at recommended tracking force, DIN 45.542 < 1 % Tracking ability at 315Hz at recommended tracking force 80 µm Compliance, dynamic, lateral 6 µm / mN Stylus type Spherical Stylus tip radius R 18 µm Equivalent stylus tip mass 0,6 mg Tracking force range 3,0-5,0 g (30-50 mN) Tracking force, recommended 4,0 g (40 mN) Tracking angle 20° Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 4... click here for more info
|
| |
 |
Ortofon OMEK Elektro Kit
Check current price & buy online.
|
| | Description: Ortofon OMEK Elektro Kit Many years of experience from producing disco cartridges, and a close contact to DJ's, have resulted in several lines suitable for all tonearms and all amplifiers. The Ortofon disco cartridges are available in ½ inch versions for mounting in standard headshells or in the elegant integrated Ortofon Concorde design - for direct mounting in tonearms with standard sockets. For easier cueing, the nose of all the Ortofon disco cartridges has an extra large cut-out which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent. Specifications: Output voltage at 1000 Hz, 5cm/sec. 7,5 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 25 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-22.000 Hz F... click here for more info
|
| |
 |
Ortofon GT Cartridge
Check current price & buy online.
|
| | Description: Ortofon GT DJ Cartridge DJ's all over the world claim very high demands to their professional equipment, among which the cartridges "plays" their decisive part by realising the scratching, back-cueing, and live artistic performance, as a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in environments with extreme soundpressure and vibration. Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminium tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will... click here for more info
|
| |
 |
Ortofon CCGEK Gold Cartridge With Extra Stylus
Check current price & buy online.
|
| | Description: Specifications: Output voltage at 1000 Hz, 5cm/sec. 6 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 23 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-22.000 Hz Frequency response 20-20.000 Hz ± 2 dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 80 µm Compliance, dynamic, lateral 7 µm/mN Stylus type Special elliptical Stylus tip radius r/R 13/25 µm Equivalent stylus tip mass 0,5 mg Tracking force range 2,0-5,0 g (20-50 mN) Tracking force, recommended 3,0 g (30 mN) Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge colour, body/stylus Gold/Gold Cartridge ... click here for more info
|
| |
 |
Ortofon CCNCS Yellow Cartridge With Extra Stylus
Check current price & buy online.
|
| | Description: Ortofon Night Club S Concorde Kit The Ortofon Pro cartridges were the first to combine the unrivalled Ortofon sound quality with the ruggedness that is a must for professional use. There is a second reason behind the overnight success of the Ortofon Pro Series: Before we developed the cartirdges, we listened to the requirements of audio professionals and built into the design all essential features for disco and radio applications. And we have continued to listen, because even a great product can always be improved upon. The result is the new Ortofon Night Club Series featuring easier cueing, new styli, better sound, and higher stability. Easier Cueing To facilitate cueing, the nose of the cartridge has an extra large cut-out which makes the stylus freely visible from above. The tip of the... click here for more info
|
| |
 |
Ortofon CCDJSK Blue Cartridge With Extra Stylus
Check current price & buy online.
|
| | Description: Ortofon DJS Concorde Kit Dj's all over the world can claim very high demands to their professional equipment, among which the cartridges "plays" their decisive part by realising the artistic scratching-back-cuing and mixing work, as a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in environments with extreme soundpressure and vibration. Many years of experience from producing PRO-cartridges, and a close contact to DJ's have now resulted in new Ortofon versions directly addressed to the user by the name DJ. Robust Cantilever We have found a number of vital features which quite naturl must be required by the DJ's to fulfil their professional job. The new Ortofon DJ cartridges offers a very clear visible c... click here for more info
|
| |
 |
Ortofon CCPK Silver Cartridge With Extra Stylus
Check current price & buy online.
|
| | Description: Ortofon Concorde Pro Kit Specifications Output voltage at 1000 Hz, 5cm/sec. 5 mV Channel balance at 1 kHz 2 dB Channel separation at 1 kHz 20 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-20.000 Hz Frequency response 20-18.000 Hz + 3 / - 2 dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 70 µm Compliance, dynamic, lateral 7 µm/mN Stylus type Spherical Stylus tip radius R 18 µm Equivalent stylus tip mass 0,5 mg Tracking force range 3,0-5,0 g (30-50 mN) Tracking force, recommended 4,0 g (40 mN) Tracking angle 20° Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge colour, bo... click here for more info
|
| |
 |
Ortofon CCPSK Black Cartridge With Extra Stylus
Check current price & buy online.
|
| | Description: Ortofon Pro S Kit Specifications: Output voltage at 1000 Hz, 5cm/sec. 5 mV Channel balance at 1 kHz 2 dB Channel separation at 1 kHz 20 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-20.000 Hz Frequency response 20-18.000 Hz + 3 / - 2 dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 70 µm Compliance, dynamic, lateral 7 µm/mN Stylus type Spherical Stylus tip radius R 26 µm Equivalent stylus tip mass 0,5 mg Tracking force range 3,0-5,0 g (30-50 mN) Tracking force, recommended 4,0 g (40 mN) Tracking angle 20° Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge colour, body/sty... click here for more info
|
| |
 |
Ortofon CCPS Black Cartridge
Check current price & buy online.
|
| | Description: Product Description DJ's all over the world claim very high demands to their professional equipment, among which the cartridges "plays" their decisive part by realizing the scratching, back-cueing, and live artistic performance, as a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in environments with extreme sound pressure and vibration. Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminum tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will nei... click here for more info
|
| |
 |
Ortofon OMNCSK Yellow Cartridge With Extra Stylus
Check current price & buy online.
|
| | Description: Ortofon OM Nightclub S Kit with Extra Stylus Features: Unique headshell has a large cutout that offers great stylus visibility while in the record groove. Bright fluorescent stylus tip is great for working in dim club lighting. Spherical styli is perfect for tought handling and scratching. Includes a spare stylus TECHNICAL DATA: Output voltage at 1000 Hz, 5cm/sec. 6 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 23 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-22.000 Hz Frequency response 20-20.000 Hz ± 2 dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 80 µm Compliance, dynamic, lateral 7 µm/mN Stylus type Special elliptical Stylus tip radius r/R 13/25 µ... click here for more info
|
| |
 |
Ortofon OMDJSK Blue Cartridge With Extra Stylus
Check current price & buy online.
|
| | Description: Ortofon OM DJS Kit Specifications: Output voltage at 1000 Hz, 5cm/sec. 6 mV Channel balance at 1 kHz 2 dB Channel separation at 1 kHz 23 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-20.000 Hz Frequency response 20-18.000 Hz + 3 / - 2 dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 80 µm Compliance, dynamic, lateral 9 µm/mN Stylus type Spherical Stylus tip radius R 18 µm Equivalent stylus tip mass 0,6 mg Tracking force range 2,0-4,0 g (20-40 mN) Tracking force, recommended 3,0 g (30 mN) Tracking angle 20° Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge colour, body/st... click here for more info
|
| |
 |
Ortofon OMPK Pro Kit
Check current price & buy online.
|
| | Description: Replacement Cartridge & Stylus for A Standard Headshell (1/2" Standard Mount E.g. Technics). Two silver spherical styli. Technical Specifications: Cartridge colour, body/stylus - Silver/Silver Cartridge weight - 5 g Channel balance at 1 kHz - 2 dB Channel separation at 1 kHz - 20 dB Channel separation at 15 kHz - 15 dB Compliance, dynamic, lateral - 7 ?m/mN Equivalent stylus tip... click here for more info
|
| |
 |
Ortofon OMPSK Pro S Kit
Check current price & buy online.
|
| | Description: TECHNICAL DATA: Frequency range at - 3dB = 20-20.000 Hz Frequency response = 20-18.000 Hz + 3 / - 2 dB FIM distortion at recommended tracking force, DIN 45.542 = < 1% Tracking ability at 315Hz at recommended tracking force = 70 µm Compliance, dynamic, lateral = 7 µm/mN Stylus type = Spherical Stylus tip radius = R 26 µm Equivalent stylus tip mass = 0,5 mg Tracking force range = 3,0-5,0 g (30-50 mN) Tracking force, recommended = 4,0 g (40 mN) Tracking angle = 20° Stylus colour = Black... click here for more info
|
| |
We hope you found all the items from Ortofon that you were looking to buy. Our inventory is updated frequently, so check back again for more great deals on Ortofon and lots of other stuff! |
